International business conference

Plastic Industry Russia - China

was held in Shenzhen (People's Republic of China) 13-14 April 2025.

In recent years, the level of our relations with China has become such as it has never been before. Twenty billion dollars in total turnover between Russia and China, six hundred projects for joint investment.

Vladimir Putin

President of the Russian Federation

The Chinese side pays great attention to the development of Sino-Russian relations, as there is a historical logic to this. You and I are partners in comprehensive strategic co-operation.

Xi Jinping

The President of the People's Republic of China

Organisers

conference sponsors

General Sponsor

Sponsor

Sponsor

Partners

The conference "Plastic Industry Russia - China" is the only industry event directly contributing to the strengthening of co-operation between Russian and Chinese companies in the polymer industry.

The conference, timed to coincide with the largest international industry exhibition Chinaplas-2025, will bring together more than three hundred representatives of the polymer business of Russia and China and will become an important platform for strengthening economic ties, stimulating innovation and jointly overcoming the challenges facing the plastics industry of the two countries in modern conditions.

Experts from Russia and China discussed the trend towards sustainability in the field of closed loop polymer economy and exchanged experience on the development of recycling in Russia and China, as well as solutions to current key challenges in this area.

The event opened in Chinese traditions - bright and solemn, and in modern Russian traditions - with maximum focus on practice. Ten conference participants (five from each country) symbolically put their hands to the screen, starting the tradition of the annual event that promotes the development of polymer markets in Russia and China.

The participants were welcomed by Mikhail YurinDeputy Minister of Industry and Trade of the Russian Federation, outlining the strategic importance of developing relations between Russia and China in the polymer market.

The plenary session addressed the issues of the current state and forecast of trade relations in the polymer industry of Russia and China. This topic was the subject of the reports by Mrs. Su DongpingMr Mikhail Katsevman, President of SPP, Vice-President of RSH, Director for Science and Development of Polyplastic, Mr Mikhail Katsavman, President of SPP, Vice-President of RSH, Director for Science and Development of Poliplastik, Mr Mikhail Katsavman, President of SPP, Vice-President of RSH, Mr Mikhail Katsavman, Director for Science and Development of Polyplastik, Mr Mikhail Katsavman, President of SPP, Vice-President of RSH He HaichaoVice Chairman of China Plastics Machinery Manufacturers Association, President of Jwell Machinery.

Opportunity to combine attendance at the international conference and the world exhibition Chinaplast 2025

Participants will be able to simultaneously participate in a rich conference programme and learn about the latest innovations and technologies at the largest Chinaplast 2025 exhibition. This will provide a comprehensive approach to gaining knowledge and inspiration for business development, and will also allow them to see practical examples of real-time application of the solutions discussed.

Optimal conditions for meeting and negotiating with new partners

The conference offers specially organised networking sessions, private meeting venues and other opportunities for business interaction. This creates a favourable atmosphere for establishing valuable business contacts, sharing experience and searching for joint projects, contributing to the strengthening of international partnerships between Russia and China.

Practice of effective international business in the polymer market in 2025

Participants will have access to up-to-date information and business cases demonstrating successful strategies and best business practices at the international level. This will enable them to apply the knowledge gained to optimise their operations, increase competitiveness and successfully develop new markets in the polymer industry.

The event will be attended by representatives of leading industry companies, raw material producers, equipment suppliers and polymer material processors.

The conference will bring together over three hundred participants from Russia and China active in the plastics industry. This diversity of participants will ensure a rich exchange of experience, establishment of new business relations and joint discussion of current trends and challenges of the industry. The participants will be able not only to expand their professional horizons, but also to find partners to implement innovative projects and strengthen their positions on the international market.

The conference will be attended by managers and specialists of leading polymer industry companies and organisations from Russia and China:

Plastics producers and processors

Representatives of companies involved in the production and processing of plastic products and polymer materials.

Suppliers of polymer raw materials and additives

Manufacturers and suppliers of polymer raw materials, materials and additives for the production of plastics and plastic products.

Polymer processing companies

Enterprises processing polymer materials and manufacturers of plastic products.

Research and innovation organisations

Representatives of research institutes and universities involved in the development of new polymer materials and processing technologies.

Manufacturers of equipment and components

Companies producing equipment and components for plastics production and processing.

Engineering companies

Specialists and representatives of engineering firms working in the polymer industry.

Export-import consultants

Companies providing consulting services on export-import operations in the polymer market.

Logistics and trading companies

Representatives of companies engaged in logistics and trading in the field of polymer materials.

Public organisations and state structures

Representatives of organisations and government agencies interested in the development of polymer materials processing.

Financial institutions

Banks and investment companies that provide financial support to the plastics industry.

Conference programme

09:00-09:15

OPENING CEREMONY

Welcoming remarks

М. N. Yurin

Deputy Minister of Industry and Trade of the Russian Federation (video greeting)

Xu Sen

Director General of Jiangweijiang International Trade Centre (Guangdong), Editor-in-Chief of Plastic Industry magazine

Е. V. Kosareva

Founder of the agency H-Media

09:15 - 10:15

Great Hall

PLENARY SESSION (NO. 1)

Polymer industry in Russia and China - current trends and market forecasts

Moderators:

М. L. Katsevman

Director for Science and Development of POLYPLASTIC, President of the Russian Union of Plastics Processors, Vice-President of the Russian Union of Plastics Processors, Vice-President of the Russian Union of Plastics Processors.

Topics

  • International trade relations in the polymer industry of Russia and China in 2024-2025.
  • State regulation and legal framework for the development of co-operation in the field of polymer processing
  • International environmental regulation of plastic production and consumption: current situation, challenges and solutions
  • Dynamics of trade relations between Russia and China: successful directions and new points of interaction

International trade relations in the polymer industry of Russia and China in 2024-2025.

М. L. Katsevman

Director for Science and Development of POLYPLASTIC, President of the Russian Union of Plastics Processors, Vice-President of the Russian Union of Plastics Processors, Vice-President of the Russian Union of Plastics Processors.

Dynamics of trade relations between Russia and China: successful directions and new points of interaction

А. V. Dakhnovsky

Trade Representative of the Russian Federation in the People's Republic of China

Co-operation and friendship between Russia and China in the polymer industry

He Haichao

Deputy President of the China Plastics Machinery Industry Association

Global communications to enhance business opportunities

Xu Sen

Director General of Jiangweijiang International Trade Centre (Guangdong), Editor-in-Chief of Plastic Industry magazine

International environmental regulation of plastic production and consumption: current situation, challenges and solutions

В. С. Petrosyan

Rector of the Lomonosov Moscow State University Open Environmental University, Chairman of the Environmental Council under the Moscow City Government, Dr Chem.

10:30 - 10:45

Collective photo

10:45 - 12:00

Great Hall

PLENARY DISCUSSION

Sustainable Russia-China co-operation in the polymer market: constraints and opportunities. Creating conditions for recycling

The following are invited to participate

12:00 - 12:30

STOP

12:30 - 13:30

PRACTICAL SESSION (Great Hall)

Issues of efficient polymer business between Russia-China countries

Moderator:

Г. Yu. Soldatov

General Director of ADITIM LLC

  • Imports and Strategies in Russia-China Co-operation: Challenges, Opportunities and Regulation (ADITIM LLC)
  • Optimisation of logistics in the supply of raw materials and finished products between Russia and China (Quehenberger)
  • Financial aspects of co-operation: currency fluctuations, sanctions restrictions, payment problems, alternative financial mechanisms
  • Prospects of gas chemical industry development in the Amur Region. Investment potential (Amur Region Investment Attraction Agency)

The following are invited to participate

Valery Samsonovich Petrosyan

Rector of the Lomonosov Moscow State University Open Environmental University, Chairman of the Environmental Council under the Moscow City Government, Dr. Chem.

Alexey Vitalievich Dakhnovsky

Trade Representative of the Russian Federation in the People's Republic of China

EASTMAX SESSION (small hall)

Comprehensive support for polymer production: new solutions and services (part 1)

Moderator:

Г. Yu. Soldatov

General Director of ADITIM LLC

  • Innovations in injection moulding: state-of-the-art equipment and technology (Taiwan Union Plastics)
  • Profile extrusion equipment: equipment selection and technological aspects
  • Film production: the latest technology and equipment for extrusion of film materials
  • Spare parts supplies for European equipment: quality, delivery time and service support
  • Innovations in PET preform production: process optimisation and quality control
  • Industrial automation: digitalisation and robotic systems in industry

The following are invited to participate

Valery Samsonovich Petrosyan

Rector of the Lomonosov Moscow State University Open Environmental University, Chairman of the Environmental Council under the Moscow City Government, Dr. Chem.

Alexey Vitalievich Dakhnovsky

Trade Representative of the Russian Federation in the People's Republic of China

13:30 - 15:00

Lunch

15:00 - 16:30

SESSION (Great Hall)

Overview of the latest technology and equipment from China's suppliers in 2025 (Part 1)

Moderator:

Г. Yu. Soldatov

General Director of ADITIM LLC

  • Intelligent modernisation, cost reduction and efficiency improvement (Dongguan Nijiasi Plastic Machinery Co)
  • Complete solutions for high performance polymers from Jiangsu Yican Special Plastic Co., Ltd.
Valery Samsonovich Petrosyan

Rector of the Lomonosov Moscow State University Open Environmental University, Chairman of the Environmental Council under the Moscow City Government, Dr. Chem.

Alexey Vitalievich Dakhnovsky

Trade Representative of the Russian Federation in the People's Republic of China

EASTMAX SESSION (small hall)

Comprehensive support for polymer production: new solutions and services (part 2)

Moderator:

Г. Yu. Soldatov

General Director of ADITIM LLC

  • Spare parts supplies for European equipment: quality, delivery time and service support
  • Innovations in PET preform production: process optimisation and quality control
  • Industrial automation: digitalisation and robotic systems in industry

16.30 - 17.00

STOP

17.00 - 18.00

SESSION (Great Hall)

Overview of the latest technology and equipment from China's suppliers in 2025 (part 2)

Moderator:

Г. Yu. Soldatov

General Director of ADITIM LLC

18.30 - 21.30

buffet and show programme

Feedback from the conference

Ekaterina Kosareva

Publisher of the journal "Polymer Materials

Georgiy Soldatov

CEO of Aditim Holding

Inna Artemenkova

Director of the ISPC (co-organiser of the conference)

Victor Phan

Director of the Russian representative office of the Chinese company Jwell Machinery

Mikhail Katsevman

President of SPP, Vice-President of RSKh, Director for Science and Development of SPP Polyplastic

Kirill Medvedev

Chief Expert of the Recycling Development and Sustainable Solutions Division of LLC Sibur

Photo gallery of the event

With the support of

Co-organisers

The participants of the conference were

The conference will cover a wide range of topical topics reflecting the needs and interests of the participants.

The reports and discussions included in the conference programme will enable the conference participants to gain a better understanding of current trends, challenges and opportunities in Russian-Chinese cooperation in the polymer industry.

Tentative topics for the conference sessions:

Trends in Russian-Chinese interaction within the polymer industry and ways to overcome negative economic and political factors in 2024-25.

Analysis of current challenges in Russia-China cooperation in the polymer industry, including sanctions, trade restrictions, and search for strategies to minimise risks and strengthen the partnership.

Effective management of business interaction between Russia and China (finance, logistics, government regulation).

Recommendations on building an effective business model in Russian-Chinese relations, taking into account financial instruments, optimisation of logistics chains and compliance with legal regulations.

Innovative technologies and solutions for the polymer industry from market leaders.

An overview of the latest technological developments in the polymer industry that can increase productivity, reduce production costs and improve environmental performance.

Import and export of commodity flows in 2025-2026. New projects and opportunities.

Outlook for raw material supplies in the coming years, including analyses of future market conditions, possible projects and new destinations for exports and imports.

Successful international projects of Russia-China in the polymer market in 2024: localisation of Chinese production facilities in Russia.

Examples of successful cases of localisation of Chinese enterprises in Russia, their impact on the market, increased product availability and development of new production facilities.

Optimising costs when doing international business.

Discussion of effective methods to reduce costs in international trade, including optimising taxes, transport schemes and adapting businesses to changing regulations.

Venue

Dayhello International Hotel Shenzhen

A luxury hotel 15 minutes drive from Shenzhen Bao'an International Airport

Forum members will receive a 41% discount on hotel accommodation regardless of room type.

Register to attend the conference!

Fill out this form and our manager will contact you within a business day.

By clicking the "Send" button, I give my consent to the processing of my personal data in accordance with the Federal Law of 27.07.2006 No. 152-FZ "On Personal Data", under the conditions and for the purposes specified in the Consent to Personal Data Processing. I agree to receive newsletters and special offers.

Conference attendees receive:

Special advantageous conditions for organised groups and delegations!

Frequently Asked Questions

Yes, there's a fee to participate.

You will be informed about the details by our managers. Register for participation or contact us by any convenient way listed on this website.

Participants pay for their own tickets and visas.

If necessary, the official logistics operator of the conference, the Intersectoral Research and Production Centre, will provide services:

  • visa support;
  • accompaniment by interpreters;
  • transfers;
  • ticket purchase;
  • additional cultural programme.

Contact Us:

Artyomenkova Inna Aleksandrovna, Director
direktor@mnpc.ru
+7 927 205-26-84

Lyudmila Chirkova, Assistant Manager
info@mnpc.ru
+7-846-205-96-01, +7-846-336-67-70

The conference programme includes free admission to ChinaPlas exhibition and group transfer from the hotel on the first day of the exhibition.

During the conference, Chinese-Russian interpreters will be on site for more effective interaction between the participants.

All conference participants can book accommodation for the duration of the conference and exhibition, if paying for participation in the conference, hotel payment is made on site

Trips to China's largest factories and a cultural programme can be arranged on request at an additional cost.

As the conference is being held in an offline format, a live online broadcast is not expected.

However, a full video recording of the event will be made and will be provided free of charge to all participants. The rest of the participants will be able to purchase the video recording.

Yes, all guests of the event receive an official certificate of attendance at the Conference.

Information partners:

Send request

Ask a question